In this example we will update the firmware using a Cas 3 Interface (v7.9)
This is the opening screen shot of the Cas 3
Click on Cam Moduke.

Now Click on Diablo Cam

Click on Diablo Cam to start the Programme

Now you can insert the Diablo Cam into the Cas 3

Make sure you have selected the Upgrade Cam option

Now click on the box with the ... in
now select the folder wher you placed the Stealth xxx.dup file in
select the Stealth xxx.dup file you wish to upload
and click open

You will now see the name of the file placed in top window
once you are sure it is the correct file
click Start Update

You will see the progress bar indicating the update is running

The update will stop at approx 70% this depends upon
the size of the file you are updating it may be slightly more or less than 70%
now the data will be written to the flash

Once the data has been written to the flash
it will then start uploading the rest of the files and folders
as shown below

When you see the message Cam programmed successfully
you can exit the the programme and start using your Diablo

All the best 'Laurals'

Click Here for additional Help