Sataid.Net     Laurals.Com     Sataid.Com      DLL-OCX.Com      Free Music

Here we shall go through the procedure of updating Polsat Keys
it's exactly the same procedure for updating keys on all providers.
Remember this can only be achieved if your receiver has been patched.
First click the Menu button on your remote control to access the Menu.
see image below

Now scroll down and select System Information
see image below

If you have patched & you do not see the Cass Menu button do the following:
click Menu then select System Information then click the OK button and enter in 2-0-0-4,
if you still get no Cas Menu option check to see you have uploaded the patched firmware to the TM 1500
and not the official firmware. If you do get the Cas Option select it by clicking the OK button
see image below

Once you enter the Cas Menu, you must now find the correct
provider you wish to update, below is the opening screen shot of
the Cas Menu.

By using the < > buttons on the remote control you can scroll
through the providers untill you find Polsat in our case it was
option 118, and now select Polsat
See image below

Now select Key 00, here is where you can start replacing the
Key with an active one, there are two options of updating keys
the first is to simply press a numeric number 0-9 on you remote
or if you need to add a alphanumeric key A-F press the Info key
see image below

The second option of entering Keys is to simply press the OK button
and you will get the 0-F keypad and you can select the Keys from there.
see image below

Select Key 01 and do exactly the same procedure
if you wish to update Key 01 as you did for updating Key 00

Once you are happy you have entered the correct Key sequence
click the Exit button then select Yes and click OK button
you have now updated and stored the new Keys.

Close down all the menus and
start using your receiver as normal.

All the best 'Laurals'

Click Here for additional Help